You're comparing stripping machines for your post-press line, and the spec sheet lists a hydraulic cylinder system. Is that overkill, or does it actually matter? For a Plastic Machinery stripping machine handling dense paperboard and plastic sheets, the force source determines whether the waste separates cleanly or tears the finished product. The TM-920/1080 Automatic Trademark Stripping Machine uses a hydraulic cylinder system delivering up to 90 bar of pressure. This article explains why hydraulic force outperforms pneumatic alternatives in stripping applications, how the precision screw guide rails and program controller turn that force into repeatable accuracy, and why the machine's ability to process paperboard, trademarks, and plastic sheets makes it a versatile addition to any die-cutting workflow.
What Packaging Producers Ask Before Buying
Sheet Sizes, Speed, and Material Range
Q: What sheet sizes and stripping dimensions does the machine support?
A: The TM series covers three models. The TM-920 handles sheets up to 920×650mm with a stripping area of 360×360mm. The TM-1080 handles sheets up to 1080×780mm with a stripping area of 550×550mm. Both models operate at a stripping speed of 25 times per minute.
Q: What materials can this machine process?
A: The machine is designed for paperboard, trademarks (tags), plastic sheets, and other small packaging materials after automatic or semi-automatic die cutting. It separates the finished product from the waste edge in one automated operation.
Why Hydraulic Force Beats Pneumatic in Stripping Applications
Stripping isn't a gentle process. The waste material is often the same density and thickness as the finished product, and it's held in place by the die-cut skeleton. Pneumatic systems, which rely on compressed air, generate limited force and can struggle when the material resists separation. Hydraulic cylinders, by contrast, deliver consistent high-pressure force regardless of material resistance. The TM-920/1080's hydraulic system generates 80 bar on the TM-920 and 90 bar on the TM-1080. That pressure is applied uniformly across the stripping area, ensuring that every waste edge is removed cleanly and every finished product is separated without tearing or deformation. For converters running dense paperboard or thick plastic sheets, this force margin is the difference between a clean strip and a costly reject.
What Consistent Pressure Means for Product Quality
Inconsistent stripping force produces inconsistent results. Too little force leaves waste attached; too much force damages the finished piece. The hydraulic system maintains pressure throughout the stripping stroke, so every cycle receives the same force regardless of material variation or wear. This consistency directly translates to higher yield and fewer rejects—critical for high-volume production where even a small defect rate adds up.
Precision Screw Guide Rails — Where Force Meets Accuracy
Force alone isn't enough. The stripping head must position itself exactly over the waste area on every cycle. The TM-920/1080 uses high-precision screw guide rails to move the stripping head with repeatable accuracy. These rails eliminate the play and drift that plague lesser systems, ensuring that the hydraulic force is applied precisely where it's needed. Combined with the program controller that manages the stripping sequence and timing, the machine delivers the durability and operational safety that continuous production demands.
Specifications Across the TM Series
| Parameter | TM-920 | TM-1080 |
|---|---|---|
| Max. Sheet Size | 920×650mm | 1080×780mm |
| Min. Sheet Size | 550×280mm | 600×400mm |
| Max. Stripping Size | 360×360mm | 550×550mm |
| Min. Stripping Size | 30×30mm | 30×30mm |
| Stripping Speed | 25 times/min | 25 times/min |
| Max. Pressure | 80 bar | 90 bar |
| Max. Stack Height | 100mm | 100mm |
| Overall Dimensions | 3300×1560×1900mm | 3750×1800×1900mm |
| Machine Weight | 2000kg | 2400kg |
| Power Consumption | 3.75kw | 5.5kw |
Applications Where Hydraulic Stripping Delivers Value
The TM-920/1080 serves post-press operations across multiple packaging segments:
Folding Carton Production
After die cutting, folding cartons need their waste edges removed and the blanks separated. The hydraulic head removes waste and releases finished cartons in one cycle. For carton converters running high-volume production, this eliminates the manual stripping bottleneck that limits throughput.
Trademark and Tag Manufacturing
Trademarks, hangtags, and labels are typically produced in multi-up layouts on paperboard. The TM-920/1080 separates each piece from the surrounding waste, delivering finished tags ready for stringing or packaging. The machine is suitable for paperboard, trademark (tags), and plastic sheet materials.
Plastic Sheet Packaging
Plastic sheet packaging—including blister cards and rigid plastic labels—presents unique stripping challenges. The hydraulic system's high pressure ensures clean separation without cracking or deforming the plastic pieces. The TM-1080's larger stripping area (550×550mm) accommodates bigger plastic sheet layouts.
IML and Blister Card Production
In-mold labels (IML) and blister cards require precise separation to maintain dimensional accuracy for downstream automation. The program controller and screw guide rails deliver the repeatability that these applications demand, cycle after cycle.
Straight Answers About Hydraulic Stripping Equipment
Q: What's the difference between the TM-920 and TM-1080?
A: The TM-1080 handles larger sheets—up to 1080×780mm compared to the TM-920's 920×650mm—and has a larger stripping area (550×550mm vs. 360×360mm). The TM-1080 also delivers higher pressure (90 bar vs. 80 bar) and has a larger footprint and weight. The TM-920 is more compact and suitable for smaller format work, while the TM-1080 handles the larger sheet sizes used in bigger packaging formats.
Q: How does the machine handle different product shapes?
A: The stripping tooling is configured for each specific die layout. The thimble locks automatically, and the chromium-plated work platform simplifies changeovers. The program controller allows operators to adjust stripping parameters for different product designs.
Q: What maintenance does the hydraulic system require?
A: The hydraulic cylinder system is designed for durability. Routine maintenance includes checking hydraulic fluid levels and inspecting seals. The precision screw guide rails should be lubricated according to the maintenance schedule to ensure smooth, accurate movement.
Q: Can the machine handle both paperboard and plastic materials?
A: Yes. The TM series is designed for paperboard, trademark (tags), and plastic sheet materials. The hydraulic pressure is adjustable to suit different material densities and thicknesses.
Q: What support is available after purchase?
A: The machine is a standard product from the manufacturer's lineup, with sales and service since 2014. Products are exported to the Philippines, Malaysia, Singapore, Turkey, India, Indonesia, Russia, the United States, Dubai, and other countries. Technical support and spare parts are available through the supplier's service network.
Request a Hydraulic Stripping Machine Configuration
A Plastic Machinery solution with 25 cycles/min stripping speed, hydraulic cylinder power up to 90 bar, and the ability to handle sheets up to 1080mm is the practical choice for converters who need clean, consistent waste separation in their post-press operations. The TM-920/1080 Automatic Trademark Stripping Machine delivers 25 times/min stripping speed, sheet sizes from 920×650mm to 1080×780mm, hydraulic cylinder system with 80-90 bar pressure, high-precision screw guide rails for repeatable accuracy, modern program controller for consistent operation, chromium-plated work platform with automatic thimble locking, and compatibility with paperboard, trademark, and plastic sheet materials.
Whether you're producing folding cartons, tags, blister cards, IML, or plastic packaging components, this machine offers the stripping automation that reduces labor, improves consistency, and eliminates the post-press bottleneck. With two model sizes to match your sheet format requirements, it integrates directly into existing die-cutting workflows.
Contact Changsinter for a stripping machine configuration assessment → their team can help you select the right model for your sheet sizes, material types, and production volume. Get a machine with hydraulic force you can rely on—so every strip is clean, every cycle is consistent, and your post-press line keeps moving.





